High Precision Auto Checking Fixture , CMM Measurements Checking Fixture Components Automotive
||High Precision Auto Checking Fixture , CMM Measurements Checking Fixture Components Automotive Checking Fixtures
||CNC machining ,Grinder,milling machining etc.
||Auto parts checking fixture /gauges
||2D(PDF,CAD) or 3D(CATIA,STP,IGS,UG)
||Black or white oxidation
||Datum & position of pins +/- 0.05mm, trim +/- 0.1mm, surface +/- 0.1mm
||10-30days to produce
||FOB ,EXW,DDP etc.
||40%with PO-60%before shipment
||Wooden case for export.
||100% Inspection Before shipment
||Automative parts checking by CMM in a car position
||Checking Gauge used to hold the product in a fixed position for CMM measurements.
The first point is the modular design method for welding fixture design, which can meet the requirements of welding process. The fixture design drawing method shall follow the national mechanical drawing standard.
The second point, the fixture is easy to operate, the design and completion of the tooling system must meet the requirements of ergonomics.
The third point, the fixture should have enough assembly and welding space, the solder joint should be easy to close in the layout.
Fourth, the fixture itself must have good manufacturing process and high mechanical efficiency.
Fifth points, all the fixture, the control panel and the panel display labels require the use of Chinese. If the use of English should be recognized by the owner.
The sixth point, all the drawings and documents in the size, the engineering unit required to use the metric system, all fasteners must be metric. Prior to the use of non - public design, the design should be approved by the owner in writing.
Seventh points, fasteners: using the national standard six angle screws and cylindrical internal thread positioning pin, all fastened places should take anti loosening measures.
Eighth, we must try to choose the common and standardized clamping mechanism and standard parts as far as possible, and make the parts easily interchangeable and easy to repair.
The ninth point, the rotary jig requires the intake from the center of rotation (using a special inlet mechanism, can rotate at any angle), the height of the rotary fixture can be adjusted.
The tenth point, the clamping device of the manual fixture is generally recommended to select the GOOD HAND brand standard product.
The eleventh point, the clamping cylinder generally adopts the buffer mechanism, in order to prevent the workpiece from damaging when the workpiece is clamped quickly.